Dinger® Rust Stain Remover

Dinger® is a very mild buffered acidic solution designed for the removal of rust/iron oxide and other ‘mineral’ stains from all types of surfaces. Dinger is used for the removal of stubborn mud rings, fertilizer stains, irrigation stains, bore water stains, and battery acid stains as well as the removal of insoluble calcium dyes or oxidized paint run off from porous concrete, brick and other building surfaces.

What Surfaces can it be used on?

Dinger is recommended for use on:

• Brick
• Natural Stone
• Concrete
• Asphalt
• Metal Siding
• Painted Surfaces

Don’t use it on these surfaces:

Dinger should not be used on the following surfaces as it may etch or damage them:

• Galvalume
• Glass
• Copper
• Aluminum
• Precious or semi-precious metals/jewelry

How to use it:

Apply Dinger with a pump sprayer, brush or roller to the affected area. To maintain consistent look over a continuous space, use Dinger across the entire continuous space to create even coverage results.

Allow the product to dwell on the surface, but do not let product dry. Rinse surface with a pressure washer or garden hose.

NOTE: Dinger is formulated to not etch cement or masonry surfaces. When working near uncoated metal or glass, make sure you are covering or protecting those surfaces.

Coverage:

1 gallon cleans approx. 250 – 400 sq ft. Exact coverage varies widely depending on the severity of staining and porosity of substrate.